Ultrasonic Disinfection Sprayer SE-XS300

Ultrasonic Disinfection Sprayer SE-XS300

Safeagle Ultrasonic Disinfection Sprayer SE-XS300 can highly atomizes(0.5-5μm) the disinfection liquid. When the object passes through, the surface of the object will be covered by the atomized disinfection liquid (the coverage rate reaches 99.5%), so as to achieve the effect of disinfection and sterilization. It can meet the disinfection and sterilization of express parcels, checked baggage and goods, personal belongings, and other different items. During disinfection, the disinfectant will be slightly moist and will not produce runoff. It can be configured and customized according to different application scenarios, with simple operation and strong applicability.

KEY FEATURES

• Integrated Ultrasonic Atomization System
• Intelligent Control Regulating Switch
• Simple Switching of Sprayer Outlet

PARAMETERS

①The design of the pipeline needs to have a solution for the backflow of fog water to prevent the backflow of water from blocking the pipe and causing the product to not fog.
②In order to better improve the mist discharge efficiency of the product, the pipe with a large diameter should be selected as much as possible in the pipeline design, and the corner design should be reduced as much as possible in the pipeline design.
③ When using the product to humidify, it is necessary to prevent the mist from flowing back to the front of the product (at the air inlet).

Note:
1. The average fog formation is related to voltage, current, working water temperature, water quality, water level and air flow. The average fog volume is based on the test data obtained by using the standard test fixture under the standard test environment of our factory (optimal water level, optimal water temperature, etc.) (average after continuous operation for one hour).
2. The size of the mist particles is related to the structure of the air duct, water quality, water temperature and power; usually, clean tap water is used for the water quality. When the water temperature is off the upper limit value, the amount of mist and large particles will increase; when the power increases, the amount of mist and large particles will increase. Particles will also increase.
3. The above water level refers to the vertical distance from the surface of the atomizing sheet of the atomizer to the water surface.
4. The working current of the product will change with the working voltage and ambient temperature. It is recommended to work under the optimum water temperature and optimum voltage, and do not exceed the limit water temperature range.
5. The quality of water quality will affect the service life of the atomizing tablet. It is recommended to use clean tap water. The use of pure water, distilled water or reverse osmosis water with very low conductivity will cause the atomization and electrolytic disinfection to be unable to be turned on normally.

Ultrasonic Disinfection Sprayer SE-XS300 - Safeagle